John Deere約翰迪爾強鹿柴油發動機氣缸蓋閥凹槽與氣門的測量與技術參數供應商，John Deere約翰迪爾強鹿柴油發動機氣缸蓋閥凹槽與氣門的測量與技術參數技術價格規格咨詢服務，John Deere約翰迪爾強鹿柴油發動機氣缸蓋閥凹槽與氣門的測量與技術參數零配件供應，John Deere約翰迪爾強鹿柴油發動機氣缸蓋閥凹槽與氣門的測量與技術參數售后服務中心，John Deere約翰迪爾強鹿柴油發動機氣缸蓋閥凹槽與氣門的測量與技術參數，John Deere約翰迪爾強鹿柴油發動機氣缸蓋閥凹槽與氣門的測量與技術參數詳細的技術參數，
John Deere約翰迪爾強鹿柴油發動機氣缸蓋閥凹槽與氣門的測量與技術參數
詳細描述
John Deere約翰迪爾強鹿柴油發動機氣缸蓋閥凹槽與氣門的測量與技術參數
Measure and record valve recess (A) using a depthmicrometer, magnetic base dial indicator or a dial indicatorwith JDG451 or KJD10123 Height Gauge (B).Measurements must be made a maximum of 3.0 mm(0.12 in.) in from edge of valve head.
Specification
Intake Valves—Recess inCylinder Head 0.61—1.11 mm(0.024—0.044 in.)
Wear Limit ................................................................. 1.63 mm (0.064 in.)
Exhaust Valve—Recess in
Cylinder Head 1.22—1.72 mm(0.048—0.068 in.)
Wear Limit .................................................................. 2.26 mm (0.089 in.)
Install new valves and inserts, or grind existing valves andinserts, as necessary, to obtain proper valve recess. Grindvalve seat inserts as required. (See REMOVE VALVESEAT INSERTS later in this group.)
A—Valve Recess
B—Dial Indicator
